Categories: Tips & Advice Part 2

Ceramic Tile Calculator – How To Calculate Tile Needed?

Even though most tile stores will accept your returns, you never want to spend more money than needed. Also, having too much tile will just clutter your home with unneeded materials.

Tile Estimator \ Calculator

 

Estimator Results

 

  Please let us know if you have any questions or concerns.

To estimate the number of tiles required for your project with this tile calculator, you must first determine the total square feet of the area that needs to be installed.

You will simply enter the length and width of the area into the above Tile Calculator, along with the size of tile and border tile if any are to be used.

Add 10% additional for straight run or additional 15% for diagonal run.

The above calculator is provided as a courtesy only. All results are estimates and are to be used as such. Country Custom Tile cannot be held responsible nor accountable for information derived from the use of this calculator.

Estimating Field Tile

• For every measurement that you determine, round that measurement up to the next foot. For example, if you measured 14 ½ feet, move that measurement up to 15 feet.

• Figure the width of the grout joint in addition to the area of the tile itself. This may seem like “overkill,” but it is surprising how much the area grout joints will eat up. Grout joints do not look very big, but when multiplied hundreds of times over, they do constitute a significant amount of tile real estate.

• Tiles which are pre-mounted on sheets already have grout spacing in them. So just measure the outside dimensions of the entire tile sheet.

• Providing that you have measured and calculated the area correctly, add an additional 10% to that number. For example, if the calculated area is 300 square feet, bump that number up by 10%, resulting in 220 square feet. However, if you are running a diagonal installation, add an additional 15%.

Estimating Trim Tile

Trim pieces are different from the field tile because they represent linear feet, rather than square ft. Measure the trim pieces very carefully, because trim pieces can often be extremely expensive. Measure the length with a measuring tape, and add an additional 15% to the total.

 

Ceramic Tile Calculator – How To Calculate Tile Needed?
5 (100%) 1 vote[s]
wm14

Recent Posts

  • Tips & Advice Part 2

Information On Tile Installation And Pricing

Homeowners know that budgets are one of the most influential factors when choosing a flooring material. Tile cost is no…

1 month ago
  • Tips & Advice Part 2

Is Glass Tile For Me?

Glass has been used in the decoration of buildings for a thousand years. Glass tiles are becoming very popular in…

1 month ago
  • Tips & Advice Part 2

Is Natural Stone Tile For Me?

Natural stone tile reflects the natural beauty of the earth, that is why they are becoming increasingly popular. Most people…

1 month ago
  • Tips & Advice Part 2

Tile Definitions And Classifications

Tile classifications of both ceramic and porcelain tile confuse many people, but the names mean very little. Porcelain is actually…

1 month ago
  • Tips & Advice Part 2

Frequently Asked Questions About Tile And Stone

This Support FAQ page provides answers to questions our support team frequently receives. Here are the questions we're most often…

1 month ago
  • Tips & Advice Part 2

Increase Your Homes Value

Capital Improvement. In many cases, adding tile to your home will increase its potential resale value tremendously. Potential buyers will…

1 month ago